Hafrik Communitity
Full V shape: The two V trusses now start at the centre of the top beam and slope down steeply to the legs, so the V is clear to see. Before, it was too shallow. They are no longer exactly 4 m: each one is about 4.47 m, because a 4 m truss can't slope that much and still reach a leg 4 m away. If you want exactly 4 m, they would have to stop short of the legs. Tell me which you prefer.
• 8 moving heads in total: 4 on the goalpost top beam, 2 on each side of the beam as before. 4 more on the V trusses, 2 on the left V arm and 2 on the right V arm.
• Rest unchanged: The top beam is still 3 m, 2 m and 3 m, with 3 red LEDs on the 2 m part and 5 red LEDs on each leg. That is 13 LEDs, and the heads are still gold.

I read your message as "8 moving heads, with 4 on the goalpost and 4 on the V." If you meant a different split, tell me and I'll change it.

New V effects, along with the old ones

• V trace: The beams from the left and right heads draw a moving V on the stage floor.
• V cross: The left and right beams cross each other and swing back out again.
• Existing effects: Circle, pan saw, tilt saw, pan swing, tilt swing, freeze, prism and fan.
• Dimmer spread: A brightness wave that goes out from the centre of the goalpost.
• Mix all: Cycles through every effect.
• LEDs: There are now three chase patterns, including one that ripples out from the centre.
• Count fixtures: The button now counts the two groups of heads separately, 4 and 4, then the 13 LEDs.
• Camera: The tour now has a shot of the full V truss.

The two keyboardists and the DJ are still on stage.
Like
3
0 Views 305 Views